DCS Data-Loader 3.0

Diskussionen, Hinweise, Feedback, usw. rund um DCS Mods und Add-Ons von Drittanbietern.

Moderator: JaBoG32 Stab

Benutzeravatar
Sparrowhawk
Advanced Member
Beiträge: 781
Registriert: 13. Sep 2012, 20:43
Wohnort: Ratingen

DCS Data-Loader 3.0

Beitrag von Sparrowhawk » 31. Dez 2016, 01:11

Hi DCS A-10C and M-2000C Pilots,

the new Data-Loader 3.0.1.7 is released!
Now with a Fuel-Management-System and a
Waypoint-Loader for the Mirage M-2000C included.

The dataloder serves to load in the cockpit waypoints and flight plans into the CDU of the DCS A-10C and the INS of the M-2000C.
The fuel management system helps to get a better overview of fuel consumption, distance and flight time (actualy only for the A-10C available).
In addition, settings can be made to Low-Fuel (Bingo and Joker) and also one High-Fuel setting for air to air refueling.
If the set values are exceeded, the pilot is informed acoustically.
In addition it is now possible to run the application on a different Windows Computer. On a tablet for example.
Further informations about this you can find in the User-Manauls.

Download the attached
Setup_Dataloader_3.0.1.7.zip
(8.74 MiB) 771-mal heruntergeladen
file, unpack and install the application with the .exe file.
The Version 3.0.1.7 remove a bug regarding the modification of the export.lua.

For updating from Version 3.0.1.6 you can download
Dataloader3_temp_Update_to_3.0.1.7.zip
(502.96 KiB) 467-mal heruntergeladen
and follow the Readme file inside.
Further informations you can find in the file "Dataloader User Manual.pdf".

If you wan't to run the Dataloader in DCS.openbeta 2.5 you have to do the following:
1. Install and start the Loader in the stable Version.
2. Copy the file "C:\Users\yourname\Saved Games\DCS\Scripts\cdu_data.luac" to "C:\Users\Sparrowhawk\Saved Games\DCS.openbeta\Scripts\cdu_data.luac"
3a. If you have the same export.lua in both DCS Versions (stable and openbeta) you can copy the export.lua from the stable to the openbeta folder.
3b. If you want to do the special entry by hand, look in the export.lua of the openbeta("C:\Users\yourname\Saved Games\DCS.openbeta\Scripts\Export.lua")
and insert the following entries:

function LuaExportBeforeNextFrame()
dofile(lfs.writedir()..'Scripts\\cdu_data.luac')
end
If the green rows already exist in the export.lua, insert only the red line.

If you have done this the DCS Data-Loader should be run in DCS openBeta and also the Radio-Tuning-Device from the side:
https://virtual-jabog32.de/forum/viewto ... 119#p90119


Note:
Run the application in Administrator-Mode!
In some cases, mostly on WIN 10 Systems, you have promlems with the missing Windwos file: 'MSWINSCK.OCX'
Therefore, I have created a special patch including a detailed description with the name: 'MSWINSCK-Patch V1.0.zip' inside the application ZIP file.
I hope that can help!

Now have Fun with the App!

Bild
Dateianhänge
Dataloader User Manual_DE.pdf
(983.13 KiB) 1103-mal heruntergeladen
Dataloader User Manual_EN.pdf
(827.82 KiB) 26879-mal heruntergeladen
Zuletzt geändert von Sparrowhawk am 26. Apr 2018, 19:59, insgesamt 4-mal geändert.
Bild

Benutzeravatar
DirtDiver
Intermediate Member
Beiträge: 234
Registriert: 28. Sep 2014, 13:26
Wohnort: Lübeck

Re: DCS A-10C CDU-Data-Loader 3.0

Beitrag von DirtDiver » 31. Dez 2016, 09:40

Danke Sparrow....wenn ich heut oder morgen Zeit hab...werd ich mal testen;)
exSQCO 322

Bild
i5 4790k RTX20070Super 6GB 16GB Ram win10 Hotas Warthog Homepit

Benutzeravatar
JaBoG32_Siddharta
Senior Member
Beiträge: 1812
Registriert: 17. Mai 2012, 21:39

Re: DCS A-10C CDU-Data-Loader 3.0

Beitrag von JaBoG32_Siddharta » 31. Dez 2016, 10:14

Hammer! Wird getestet!
JaBoG32 322nd "Flying Monsters"

Bild

Benutzeravatar
JaBoG32_SNAFU
Semi-Professional
Beiträge: 2759
Registriert: 4. Mär 2013, 08:50

Re: DCS A-10C CDU-Data-Loader 3.0

Beitrag von JaBoG32_SNAFU » 31. Dez 2016, 11:42

Kann man das eigentlich auch für die M2000 umschreiben?

Benutzeravatar
bilgatus
Intermediate Member
Beiträge: 123
Registriert: 23. Nov 2013, 18:13

Re: DCS A-10C CDU-Data-Loader 3.0

Beitrag von bilgatus » 31. Dez 2016, 12:07

JaBoG32_SNAFU hat geschrieben:Kann man das eigentlich auch für die M2000 umschreiben?
Hast du mich nicht letztens ausgelacht für genau diese Frage? :twisted: :bombe:

:lol: :lol:

Benutzeravatar
JaBoG32_SNAFU
Semi-Professional
Beiträge: 2759
Registriert: 4. Mär 2013, 08:50

Re: DCS A-10C CDU-Data-Loader 3.0

Beitrag von JaBoG32_SNAFU » 31. Dez 2016, 12:20

Ja. 8)

Ist ja auch nicht für mich... :lauf:

Wann habe ich schon mal mehr als 2 wegpunkte bei der M2000 eingegeben. So gross ist Georgien ja auch nicht.

Benutzeravatar
JaBoG32_Toolface
Intermediate Member
Beiträge: 357
Registriert: 30. Dez 2014, 19:49

Re: DCS A-10C CDU-Data-Loader 3.0

Beitrag von JaBoG32_Toolface » 31. Dez 2016, 14:01

Hallo Sparrow,

vielleicht bin ich zu doof... aber ich krige diese Fehlermeldung:
Fehler.jpg
Fehler.jpg (22.15 KiB) 12717 mal betrachtet
Was mache ich falsch?

Gruß

Toolface
Bild

Ignis cadent de caelo.

Benutzeravatar
Sparrowhawk
Advanced Member
Beiträge: 781
Registriert: 13. Sep 2012, 20:43
Wohnort: Ratingen

Re: DCS A-10C CDU-Data-Loader 3.0

Beitrag von Sparrowhawk » 31. Dez 2016, 17:00

vielleicht bin ich zu doof... aber ich krige diese Fehlermeldung:
Ist die Datei "MSWINSCK.OCX" im System vorhanden - prüfe hier nach:
Bei einem 32 Bit System:
C: Windows\System32\
Bei einem 64 Bit System:
C: Windows\SysWOW64\

wenn ja, versuche diesen Befehl (als Admin ausführen!).

Start -> unter Suche "CMD" eingeben -> rechtsklick -> als Admininstrator ausführen -> regsvr32 mswinsck.ocx eingeben.

Falls die Datei nicht vorhanden ist habe ich sie mal als ZIP mit angehängt.
Auspacken und in das Deinem Betriebssystem entsprechende System Verzeichnis kopieren. (Klappt nur als Admin)
Dann nochmal den Befehl ausführen.
Dateianhänge
MSWINSCK.zip
(55.69 KiB) 486-mal heruntergeladen
Bild

Benutzeravatar
Sparrowhawk
Advanced Member
Beiträge: 781
Registriert: 13. Sep 2012, 20:43
Wohnort: Ratingen

Re: DCS A-10C CDU-Data-Loader 3.0

Beitrag von Sparrowhawk » 31. Dez 2016, 17:08

Kann man das eigentlich auch für die M2000 umschreiben?
Ggf schon. Dazu müsste ich aber zumindest erst mal das Muster haben...
Welches ich mir aber deshalb nicht kaufen werde. :wink:
Was auf Dauer aber nicht so bleiben muss...
Bild

Benutzeravatar
maxxs
Junior Member
Beiträge: 84
Registriert: 19. Nov 2012, 12:17

Re: DCS A-10C CDU-Data-Loader 3.0

Beitrag von maxxs » 31. Dez 2016, 18:29

Habe das gleiche Problem.
Die angegebene Lösung probiere ich nachher aus
______________________________________

die größe eines mannes, messe ich nicht an der anzahl seiner freunde. viel mehr, an der seiner feinde

Bild

Antworten